Floyd Roll - Profile on BisManOnline

3 days ago

2" NMTB 50 Taper End Mill Holder Universal Engineering p/n 4611046

Tools - Minot, ND

3 days ago

ISCAR EMT Morse Taper 5 (MT5) ER40 Collet Chuck

Family: MT-ER A DIN 6499 ER40 Collet Chuck with a DIN 228-2 Morse Taper 5 Shank. Includes the ISCAR Preset 28x1.5 Screw Plug (Depth Set Screw). Used

Tools - Minot, ND

$200

3 days ago

3 Photos

NEW! PARLEC NMTB50 Collet Milling Chuck N50-75SC3-LDX

Accepts 75PG / 75TG COLLET SERIES - .031-.750" (.8-19MM) Collet seat taper T.I.R. 0.0002" Collet face within 0.06 of nut face for maximum rigidity.

Tools - Minot, ND

$40

3 days ago

3 Photos

NEW! 3 HP DC MOTOR Electric Kart / EBike / Project 2.75hp 12.8 VDC 12 VOLT

Motor Flange O.D. 6.5", 0.6205" Thick. Bolt Circle 6" Center x 4 Threaded Holes 3/8-16 tpi. 4.4825 O.D. Locating-Centering

Bikes & Equipment - Minot, ND

$250

3 days ago

3 Photos

3/4" Kwik-Switch 400 End Mill Holder Universal Engineering P/N's 80445

Tools - Minot, ND

$40

3 days ago

3 Photos

NEW! Kennametal KSM3005RAN25423105 Modular 3" Milling Head

Includes 20 New ANGT254PPFR6LGJ Inserts, Grade: KC730 and a Kwik Switch 400 1 1/4" Shell End Mill Arbor.

Tools - Minot, ND

$400

3 days ago

3 Photos

NEW! Kennametal KSSP300R4SD43L240 Modular 3" Milling Head

Includes all 20 inserts screws. The one pictured is not included (just to show type used). Also included is a Universal Engineering Kwik

Tools - Minot, ND

$250

3 days ago

3 Photos

NEW! JANCY AB4MT #4MT | Morse Taper 4 Coolant Thru Arbor

for 3/4" Series Weldon Shank Rotabroach/Slugger/Annular Cutters. Annular Cutter in 3rd Photo is NOT Included. Pictured just to show what the

Tools - Minot, ND

$100

3 days ago

3 Photos

NEW! COLLIS Collet Chuck # 78304 | TG150 Series Morse Taper 5 (MT5)

Holds tooling with shanks up to 1-1/2" with single angle collets. Made in USA! (The Good Stuff)

Tools - Minot, ND

$180

3 weeks ago

2 Photos

Antique Chain Hoist Block & Pulley 1.5 Ton Wright 414 C

Antiques - Minot, ND

$60

3 weeks ago

3 Photos

NEW! DORIAN SDN35CXA Lathe Quick Change Tool Post, CXA, 14-17 In Swing

Fully interchangeable with Aloris and other standard tool posts. Holding force produces over 20,000 lbs. per sq. inch. The Good

Tools - Minot, ND

$480

3 weeks ago

2 Photos

NEW! DORIAN QITP-50 QUADRA Quick Change Indexing Lathe Tool Post & 4 Tool Holders

NEW! DORIAN D50DA-2 Boring Turning & Facing Holder. Plus 3 more used tool holders, a DORIAN D50DA-6 Quick Change

Tools - Minot, ND

$1,250

3 weeks ago

3 Photos

Milling Vise Base | Universal-Base

Clamping Circle 6-3/4' Top. Designed for 5/8" Bolts. Top pin O.D. 7/8", Height Set Flat 7-1/4". Bottom Base 12-15/16" Long by 9-5/8" Wide. All 3 pivots marked 0-90

Tools - Minot, ND

$200

3 weeks ago

3 Photos

Kwik-Switch 400 Series TG150 Collet Chuck with a 1-1/2" Collet

Tools - Minot, ND

$60

3 weeks ago

3 Photos

Erickson (Kennametal) TG138 Collet Chuck | Potential Machine Tool Spindle

Includes 7 TG-138 Collets: 1/2", 5/8", 49/64" (Clamping Range to 3/4"), 7/8", 1", 1-1/8" and 1-1/4". The Chuck is New Old

Tools - Minot, ND

$70

3 weeks ago

3 Photos

Kennametal TG150 Collet Chuck | Potential Machine Tool Spindle

New Old Stock, 2" Shank comes with one (Used) 1.5" Collet P/N SS200TG150117. The Shank has 1.167" inside threads (1.25" O.D.?) I don't

Tools - Minot, ND

$65

3 weeks ago

3 Photos

NMTB-50 Taper DeVlieg Microbore C8 Collet Chuck with 13 Collets

All but 2 Collets are Sandvik Coromant (as noted), Sizes are: 3/8", 1/2" Balas, 9/16", 19/32", 5/8", 11/16", 23/32", 3/4". 13/16",

Tools - Minot, ND

$60

3 weeks ago

3 Photos

ERICKSON SUNDSTRAND TG100 COLLET CHUCK | Potential Machine Tool Spindle

O.D. of the Shank is 2", Includes one 3/4" TG100 Collet. Chuck Range is 3/32" to 1"

Tools - Minot, ND

$30

3 weeks ago

3 Photos

Roll About Tool Tray | Stand | Salon Equipment

Rolling Tool Tray | Stand Stainless Steel Salon Equipment 21-1/2" x 15-1/2" Stainless Steel Tray. 28" to 36" Adjustable Height

Salon & Spa - Minot, ND

$25

3 weeks ago

2 Photos

NEW! Hougen Rotabroach Morse Taper 5 | MT5 Coolant Thru Arbor #49908

NEW! Hougen Rotabroach Morse Taper 5 | 5MT Coolant Thru Arbor #49908 for use with 1-1/4" Series 53000. Made in USA!

Tools - Minot, ND

$100

3 weeks ago

3 Photos

NEW! ROHM Lathe Live Center MK 5 (MT5) 110H

MT: 5 Shank, Size: 110 H Workpiece weight max. kg: 2000 [4409.245 LBS] , Concentricity deviation max. mm: 0.005 [0.000197"], Rotation speed max. rpm:

Tools - Minot, ND

$417

3 weeks ago

3 Photos

FORD FE Factory 3 Deuce | Intake and Carburetor Assembly OEM 406 427 428 390 CID

Parts & Accessories - Minot, ND

$3,000

3 weeks ago

3 Photos

Foundry Cast Wall Mount 6 Blade Industrial Fan Vintage Steampunk

Outside Diameter 26-3/4", Inside Diameter 23-3/8", Width 12-1/4"

Industrial Supply - Minot, ND

$225

3 weeks ago

3 Photos

EXCELLENT! Bison 6-1/4" 6-Jaw SET-TRU Scorll Lathe Chuck w/Bison D1-3 Back Plate

Unique Micro-adjustment Feature Enables Concentricity to-.0005" TIR, w/Fine Adj. Scroll and Jaws are Hardened and

Tools - Minot, ND

$1,200

3 weeks ago

3 Photos

5/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80444

Tools - Minot, ND

$35

3 weeks ago

3 Photos

1/2" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80443

Tools - Minot, ND

$35

3 weeks ago

3 Photos

3/8" Kwik-Switch 400 End Mill Holder Universal Engineering p/n 80442

Tools - Minot, ND

$35

3 weeks ago

Mercury Mariner Outboard 90HP-3CLY OEM Power Trim Relay Switchs PN 8996158

Price is for all three.

Boats - Minot, ND

$20

3 weeks ago

3 Photos

Mercury Mariner Quicksiver 90HP-3CLY Outboard OEM Switchbox & Ignition Coils

OEM Switchbox PN 332-7778A1, Ignition Coils PN M 2936

Boats - Minot, ND

$40

3 weeks ago

3 Photos

Dorian Super Quick Change SD35CXA Lathe Tool Post with 2 Holders

DORIAN #D35CXA-7-71C Extra Heavy Duty CUT-OFF BLADE Lathe Tool Holder & a Generic Turning/Facing Tool Holder. Tool Post is missing

Tools - Minot, ND

$150

3 weeks ago

3 Photos

NEW! Dorian Quadra OD/ID Lathe Threading Holder QITP25N-881

Includes a TNMC 32NV CM14 Thread Insert

Tools - Minot, ND

$175

more than 5 weeks ago

3 Photos

2 Sets | Jacobs 900 Series Rubber Flex Collets 1/16" ~ 1-3/8"

Also included are the 4 Largest Plugs (Used to Chuck Up Short Stuff), [7/8"~1"], [1"~1-1/8"], [1-1/8"~1-1/4"], [1-1/4"~1-3/8"].

Tools - Minot, ND

$200

more than 5 weeks ago

Forged T-Slot Bolts 3/4"-10 UNC Thread Grade 5 ZIP Bolts 30026

QTY. 8, 8" Length Under Head, OAL 8.432", Thread Length 2-1/2", Slot Width 0.755", Head Dimensions 0.432" x 1.25" (Nominal). Of course

Tools - Minot, ND

$40

more than 5 weeks ago

3 Photos

Kwik-Switch 300 Collet Chuck TG100 Universal Engineering p/n 803469

Tools - Minot, ND

$45

more than 5 weeks ago

3 Photos

NEW! Kwik-Switch 400 Milling Chuck, 5 Mill Collets, +Acura-Flex Collet Nut

Universal Engineering Acura-Flex Chuck p/n 804290, Milling Collet Nut 901376, Includes 5 Positive Retention Type MILL Collets,

Tools - Minot, ND

$200

more than 5 weeks ago

3 Photos

1"-5 Pitch ACME Threaded Rod and Nut

ENCO 1"-5 Acme Threaded Rod | C1018 Steel Min Tensil Strength (typ) 64,000 psi, Hardness 126 Hb. Hex Size 1-5/8", Nut Thread Length 0.990". I made these to set

Tools - Minot, ND

$15

more than 5 weeks ago

3 Photos

ER40 Lathe Collet Chuck D1-3 Camlock Mount (3901-5041) 125mm Diameter

Tools - Minot, ND

$85

more than 5 weeks ago

3 Photos

JACOBS Spindle Nose Lathe Chuck D1-3 Camlock Mount w/2 Collet Sets 1/16"~1-3/8"

Tools - Minot, ND

$450

more than 5 weeks ago

3 Photos

Antique Cast Iron Wagon Jack | Old Barn De'cor

$100 (EACH) Will sell one at a time.

Antiques - Minot, ND

$100

more than 5 weeks ago

3 Photos

NEW! CAT 50 Automotive Shank Adapter with a BILZ Size #2 Tap Driver 1 3/8''

Kennametal C156403A02 CL6, BILZ WFP2 Tap Driver #0706124.

Tools - Minot, ND

$50

more than 5 weeks ago

3 Photos

NEW! Kwik-Switch 400 Power Grip Mill Chuck

Kennemetal K400SD752570 and Wrench. Uses 3/4" O.D. Reduction Sleeves for 1/8" to 5/8" Shank End Mills (Tooling). Collets slide into the Nose of the Chuck.

Tools - Minot, ND

$60

more than 5 weeks ago

3 Photos

Kwik-Switch 400 Adapter with Ingersoll 3" Indexable Facemill 6K6V 03R06

Universal Engineering #80435 Shell End Mill Adapter 1" Arbor. Uses NNE 324 Inserts. If you are interested in the Face Mill

Tools - Minot, ND

$140

more than 5 weeks ago

2 Photos

Kwik-Switch 400 Series TG100 COLLET CHUCK w/1" Collet

Tools - Minot, ND

$55

more than 5 weeks ago

3 Photos

Universal Eng. Kwik-Switch 400 Microbore Boring Bar Unit, P/N: 805723

Bore Range 2-7/16" to 3-7/16". Rigibore Boring Cartridge R7A2, and one TCMT 16T308 FG CT3000 TAEGUTEC Insert. Cerment P05-P25

Tools - Minot, ND

$98

more than 5 weeks ago

3 Photos

NEW! Alisam QCR-100 Quick Change Lathe Tool Holder Rack

AXA Size. With one of these you can mount 2 of your AXA size tool holders to your tool chest, bench or on the wall. 8 available. The DORIAN

Tools - Minot, ND

$15 Each

more than 5 weeks ago

3 Photos

JACOBS Spindle Nose Lathe Chuck D1-6" Camlock Mount w/2 Collet Sets 1/16"~1-3/8"

Tools - Minot, ND

$460

more than 5 weeks ago

3 Photos

NEW! Valenite 2" Coolant Thru Indexable Drill VWDR-200-125W-200

VAL-U-DEX-HP 1-1/4" Shank, +20 WCEM 421-3P VC111 inserts. Made in USA

Tools - Minot, ND

$110

more than 5 weeks ago

3 Photos

CAT-50 TG-150 Collet Chuck ERICKSON CV50-TG150 300 | Gauge 3"

Tools - Minot, ND

$30

more than 5 weeks ago

3 Photos

ENCO Super Duty Ball Bearing Drill Chuck 3/8"~1" Capacity w/MT3 Arbor

Enco Model 290-1535. K20-JT5 with Morse Taper 3 Arbor. I purchased this in the mid 1990's. It is in excellent condition as you

Tools - Minot, ND

$120

more than 5 weeks ago

3 Photos

NEW! ISCAR DZ044-099-40-06 HELIQUAD INDEX DRILL w/10 Inserts

Coolant Thru 44mm ~ 1.732283" Includes Factor Pack of 10, WOLH 3-1-GF Grade IC328 ISCAR Inserts (Slow to Medium Feeds). Can also use WOLH

Tools - Minot, ND

$180

more than 5 weeks ago

2 Photos

Dorian QUADRA QITP25-36 #36 5C Lathe Tool Collet Holder w/1" Hardinge Collet

Tools - Minot, ND

$100

more than 5 weeks ago

2 Photos

Chain Hoist | Ratchet | Come Along 3/4 ~ 1 Ton

Pull Lift 2 Chain Made in USA

Tools - Minot, ND

$125 OBO

more than 5 weeks ago

2 Photos

Cadillac 2007-2014 Escalade Chrome Wheel Center Cap 22" 7 Spoke Rim 200mm

Parts & Accessories - Minot, ND

$15

more than 5 weeks ago

3 Photos

Kwik-Switch 400 Double Taper XZ Collet Chucks with 11 Collets

Universal Engineering, (2) p/n 80422, 1 Nut p/n 551108, Two Bearing Type Nuts (No p/n's) Includes a NMTB-50 Chuck p/n 55240 and 11 XZ

Tools - Minot, ND

$180

more than 5 weeks ago

3 Photos

NMTB50 Taper Nikken Multi Lock Milling Chuck CA50 1-5/8" Set

Includes Wood Case and 10 Collets: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" 1", 1-1/8", 1-1/4". These milling collets slip in and out

Tools - Minot, ND

$140

more than 5 weeks ago

3 Photos

Kwik-Switch 300 Boring Head Adapter Universal Engineering p/n 95341

Tools - Minot, ND

$50

more than 5 weeks ago

3 Photos

OZZ Boring Head w/Kwik-Switch 400 Adapter, KS-400 ZZ Collet Chuck & 5 Collets

Boring Head p/n 95298, Chuck p/n 80421, Nut(s) p/n 551098, Collet Sizes: 1/2", 5/8", 3/4", 13/16" & 1". Collets hold

Tools - Minot, ND

$250

more than 5 weeks ago

ERICKSON DA180 Collet Extension Holder

Straight Shank 1" x 3" w/1-1/4" Sleeve. Includes 5/16" and 5/8" DA180 Collets

Tools - Minot, ND

$50

more than 5 weeks ago

2 Photos

1972-76 Duster Fender / Rear Tail Panel Emblem

Parts & Accessories - Minot, ND

$40

more than 5 weeks ago

2 Photos

NEW! Dorian D25AXA-36 #36 5C Collet Holder Lathe Tool Holder

The label reads 1/16" to 1.0" Tool Capacity, but I have both a 1-1/16" and 1-1/8" 5C Collet and they fit too.

Tools - Minot, ND

$100

more than 5 weeks ago

3 Photos

NEW! Lathe Collet Chuck 32mm Straight Collet MLC32 +19 Collets

10 NEW iGeshi C32mm Straight Shank Collets 5, 7, 9, 10, 16mm (5/8"), 17, 18, 20, 23, 25mm,+9NEW Lyndex 32mm x, 1/8", 3/16", 1/4", 5/16",

Tools - Minot, ND

$250

more than 5 weeks ago

3 Photos

R8 1-1/2" Schell Mill Arbor

Tools - Minot, ND

$35

more than 5 weeks ago

3 Photos

NMTB40 Taper Nikken Multi Lock Milling Chuck CA40F-1-1/4" with 4 Collets

Includes 3/8", 9/16", 3/4" and 1" Nikken Straight Shank Collet Sleeve's. Collets Insert into the Nose of the Chuck so there

Tools - Minot, ND

$80

more than 5 weeks ago

3 Photos

Mercury Mariner OEM 90HP-3CLY 2 Stroke Carb Carburetor Rack Set of 3

Boats - Minot, ND

$150

more than 5 weeks ago

3 Photos

Dorian D35CXA-881 Universal Lathe Threading & Grooving Holder

Has the Out Side Thread Adapter p/n TIH354-32 , The Holder can accept an inside Thread Adapter as well (Not Included). Does Include a

Tools - Minot, ND

$80

more than 5 weeks ago

3 Photos

CAT-50 TG-100 Collet Chuck Scully-Jones-4 5510 CS-1382-8E 5.25" Gauge

Tools - Minot, ND

$25

More on BisManOnline

HELP & SUPPORT

About

Floyd Roll's Listings